Yodify DEC Brand Library
Model 70 Electrochemical Oxygen Analyzer
Model 70 Electrochemical Oxygen Analyzer
Brand: Advanced Micro Instruments, IncThe AMI Model 70R1 is the ideal solution for measuring oxygen in non-flammable gases in a general-purpose environment.
In a very small size, and at low cost, it provides a complete electronic package with a full set of features together with a zirconium oxide sensor that has an expected ten year life, with virtually no calibration required.
Traditional electrochemical oxygen analyzers suffer from poor stability, requiring monthly calibration and frequent sensor replacement, and they suffer from sensitivity to both temperature changes and barometric pressure changes.
Their reading can change by as much as 10% when a weather change occurs.
The AMI model 70R1 suffers from none of these issues. It has been tested over a temperature range of 0° to 120° F.
Features- Percent oxygen measurement from 0.00% to 25% in nonflammable gases
- 50% or 95% versions available
- Long-life high-stability zirconium oxide sensor
- Expected sensor life of over ten years
- Virtually no sensitivity to barometric pressure or ambient temperature
- Virtually no sensitivity to humidity changes
- No support gases required
Specifications
Display
- 3-1/2-Digits
Power Requirement
- 10-28 Vdc < 3 W Supplied with a 115 Vac to 12 Vdc Adapter
Pressure Range
- Inlet Gas Pressure - psig: 1 to 30 (kPa: 6.895 to 206.8, bar: 0.06895 to 2.068)
Process Connection - Other
- 1/4" 316 Stainless Steel Compression Fitting
Range
- 0 to 1 %
- 0 to 10 %
- 0 to 25 %
- 0 to 5 %
- Optional: 0 to 50 %
- Optional: 0 to 95 %
Repeatability
- ± 1 % of Range or ± 0.1 % of Oxygen, whichever is greater
Wetted Materials
- 316 Stainless Steel
Documentation
Brand-Managed Distributed Enterprise Catalogs (DEC)
for Authorized Channel Partners
for Authorized Channel Partners
Book a DEC Demo