Yodify DEC Brand Library
2863 2/2-Way Solenoid Control Valve
2863 2/2-Way Solenoid Control Valve
Brand: Burkert Fluid Control Systems
Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4 mm. It is based on the standard version of Type 2873. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.).
Compared with the standard version, the valve is essentially of simpler construction and assembly and testing procedures are optimized, easing high volume series production with shorter delivery times.
Valve control takes place through a PWM signal. The duty cycle of the PWM signal determines the coil current and hence the position of the plunger.
The Burkert control electronics Type 8605 converts an Analog signal to a reference value corresponding to the valve type PWM signal and provides additional functions such as temperature compensation (coil heating), ramp function and the adjustment of minimum and maximum duty cycle/coil current for the control range.
Features- Made for custom engineered applications
- DN 0.03" to 0.15" (0.8 to 4 mm)
- 1/8", 1/4” sub-base or custom engineered armature
1 - 12 of 23 Part Numbers
249 140
- Model - Standard-Design
- Orifice Size / Port Connection - 1.2 mm / G 1/8"
- Body Material - Brass
249 141
- Model - Standard-Design
- Orifice Size / Port Connection - 1.5 mm / G 1/8"
- Body Material - Brass
251 831
- Model - Standard-Design
- Orifice Size / Port Connection - 4 mm / G 1/4"
- Body Material - Brass
254 182
- Model - Standard-Design
- Orifice Size / Port Connection - 2 mm / G 1/8"
- Body Material - Brass
255 699
- Model - Standard-Design
- Orifice Size / Port Connection - 2 mm / G 1/4"
- Body Material - Brass
255 700
- Model - Standard-Design
- Orifice Size / Port Connection - 4 mm / G 1/4"
- Body Material - Stainless Steel
274 893
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 0.8 mm / G 1/8"
- Body Material - Brass
274 894
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 1.2 mm / G 1/8"
- Body Material - Brass
274 895
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 1.5 mm / G 1/8"
- Body Material - Brass
274 896
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 2 mm / G 1/8"
- Body Material - Brass
274 897
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 2.5 mm / G 1/4"
- Body Material - Brass
274 898
- Model - Variants with ATEX / IECEx
- Orifice Size / Port Connection - 3 mm / G 1/4"
- Body Material - Brass
1 - 12 of 23 Part Numbers
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
Approvals & Certifications
- ATEX - II 2 G EEx M II T4 & T5
- IECEx - Ex Mb E IIC T4, T5 Gb
BSP Connection
- G 1/4" Female
- G 1/8" Female
Consumption
- Power: 9 W
Current
- 4-20 mA (At 24 V Hold) - Max.
Duty Cycle
- 100 % Duty Cycle Continuous Rating
Electrical Connectors
- Cable Plug Typical 2508
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- Brass
- Stainless Steel
Environmental Protection
- IP65
Flow Rate
- 19 to 345 QNn (L/min)
- Water: 0.018 to 0.320 Kvs (m³/hour)
Frequency
- PWM Control Frequency: 400 Hz
Hysteresis
- < 5 %
Media
- Neutral Gases & Liquids
Mounting Position
- Preferably with Actuator Upright
Nominal Pressure
- psi: 0 to 232 (kPa: 0 to 1,600, bar: 0 to 16)
NPT Connection
- 1/4" NPT Female
- 1/8" NPT Female
Orifice Size
- 0.03" to 0.15" (0.8 to 4 mm)
Power Supply
- 24 Vdc
Pressure Range
- psi: 0 to 232.1 (kPa: 0 to 1,600, bar: 0 to 16)
Process Temperature
- -10° to 90° C (14° to 194° F)
Ratio
- Span - 1:25
Repeatability
- < 1 % of Full Scale
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Sensitivity
- < 1 % of Full Scale
Solenoid Type
- 2/2-Way
Brand-Managed Distributed Enterprise Catalogs (DEC)
for Authorized Channel Partners
for Authorized Channel Partners
Book a DEC Demo