Yodify DEC Brand Library
SolaHD™ STC-POE Series, Category 5 and 6 Power-over-Ethernet Applications
SolaHD™ STC-POE Series, Category 5 and 6 Power-over-Ethernet Applications
Brand: SolaHDSTC-PoE Series is designed to protect expensive equipment and critical data communications from internally generated transients and noise in a Power-over-Ethernet (PoE) based network.
They are suitable for both Category 5e and Category 6, the most widely used Ethernet connectivity methods on the market today.
Commonly referred to as Cat5e and Cat6, these methods are defined in ANSI/TIA/EIA 568-B standard for Unshielded Twisted Pair Cabling.
Features- Exceeds CAT 5 PoE & 6 transmission values. Applications up to 60 Vdc @ 300 mA.
- STC-PoE-65FF: Single use design.
- STC-PoE-65FF: 60 Vdc @ 300 mA continuous.
- STC-PoE-65FF: Cost effective protection.
- STC-CAT6-PoE-I: Hybrid PTC resettable fuse.
- STC-CAT6-PoE-I: 60 Vdc @ 750 mA continuous.
- STC-CAT6-PoE-I: Isolated ground available.
- STC-CAT6-PoE-I: 10kA peak surge current.
- STC-CAT6-PoE-I: 10kA peak surge current.
Specifications
Brand
Certified Transmission Speeds
- 10Base-T, 100Base-T, 1000Base-T
DC Breakover Voltage
- 60 Vdc
Insertion Loss
- < .1 dB
STC-CAT6-PoE-I Mode of Protection
- All Lines Protected, Signal H-L H-G, L-G
STC-CAT6-PoE-I Peak Surge Energy
- 750 Watts
STC-P0E-65FF Mode of Protection
- Normal Mode All Lines Protected
STC-P0E-65FF Peak Surge Energy
- 300 Watt
Brand-Managed Distributed Enterprise Catalogs (DEC)
for Authorized Channel Partners
for Authorized Channel Partners
Book a DEC Demo