GN 505 T Nut Accessory for Profile System

T-Nuts GN 505 can be inserted vertically into a T-Slot like rhombus T-Nuts GN 508.1.When tightening the clamping bolt, the nut will be forced into a crosswise position by the applied torque and firmly anchored in the T-slot. This action is achieved by using T-nut type MB which is intentionally fitted with an overtight fit requiring a higher torque. To remove the bolt and T-nut a 90° anticlockwise turn is sufficient to withdraw the two components with the clamped workpiece. The clamping face of the T-nut is serrated to ensure that a possible plating coat in the T-slot is penetrated to establish a good electrical contact.